POLYMER COATINGS FOR WATER, WASTEWATER STRUCTURES ITW Futura Coatings
ITW Furura Coatings manufacture polyurethane elastomer, polyurea, epoxy and vinyl ester lining systems, on concrete and steel for applications in water and wastewater structures, including structural polyurea systems for concrete rehabilitation.
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
CC 4500
A high performance, high density, ceramic filled, brushable epoxy for repair of Protec II PW and Protec II PW-ER.
*
Futura‑Bond 320 Gel
A 100% solids, two component, standard cure, epoxy surfacer/filler for filling and sealing porous or damaged concrete or other masonry surfaces. Applied by squeegee or trowel.
Futura‑Bond 415
A high solids, two component, standard cure, water-borne epoxy primer with outstanding adhesion to most concrete, masonry, metal and wood surfaces, including damp concrete. Applied by airless spray, brush or roller.
Futura‑Bond 610 HS
A high solids, two component, standard cure, urethane primer. Specifically formulated to provide excellent anti-corrosive properties and to accept fast set and standard cure high build polyurethane or polyurea topcoats. Applied by airless or conventional.
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Futura‑Thane 5061
A 100% solids, fast set, two component high performance polyurea hybrid elastomer certified per NSF/ANSI Standard 61 for use as a lining in potable water tanks and pipe. It provides a tough, abrasion resistant, elastomeric lining for steel and concrete ta.
Futura‑Thane 5061(espanol)
Elastómero híbrido de poliurea de alto rendimiento de dos componentes, con 100% de sólidos, de endurecimiento rápido certificado por el estándar 61 de NSF/ANSIpara ser usado como revestimiento en tanques y tuberías de agua potable. Brinda un revestimi
Futura‑Thane 5360
A 100% solids, two component, fast set, structural polyurea. It’s strong structural characteristics allow it to be applied over weak surfaces where other coatings may not be applied. It’s formulation allows for applications at low temperatures, high humid.
See Specs Below
Specification And Application Guideline For Lining Concrete Tanks, Secondary Containment and Manholes With Futura-Thane 5360
Specification and Application Guideline For The Rehabilitation Of Concrete, Brick and Masonary Manholes, Lift Stations Storm Drains And Other Wastewater Structures With Futura-Thane 5360.
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Geothane 5020
A 100% solids, two component, fast set, aromatic polyurethane elastomer. It forms a tough, monolithic, seamless, highly elastomeric membrane with excellent water and chemical resistance. Applied using heated plural component spray equipment.
Repair and Touch-up Guideline for Geothane 5020 applied to concrete substrates.
Specification Guideline For Lining Steel Tanks And Secondary Containment Areas With Geothane 5020
Specification Guideline For Geomembrane Linings For Earthen Secondary Containment Areas, Basins, Ponds and Reservois With Geothane 5020
Specification Guideline For Lining Concrete Tanks And Secondary Containment Areas With Geothane 5020
Geothane 520
A 100% solids, two component, standard cure, aromatic polyurethane elastomer. It forms a tough, monolithic, seamless, highly elastomeric membrane with excellent water and chemical resistance. Applied by airless spray or roller.
See Specs Below
Specification Guideline For Lining Concrete Tanks And Secondary Containment Areas With Geothane 520
Specification Guideline For Lining Steel Tanks And Secondary Containment Areas With Geothane 520
Repair and Touch-up Guideline for Geothane 520 applied to concrete substrates.
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Irabond UU 96
A single component, standard cure, primer generally used as a second stage adhesive. Applied by airless or conventional spray, brush or roller. Iraseal 200A 100% solids, two component, fast set, pure polyurea that is extremely resistant to moderate concentrations of both acid and alkaline solutions. Applied using heated plural component spray equipment.
See Specs Below
Iraseal 200
A 100% solids, two component, fast set, pure polyurea that is extremely resistant to moderate concentrations of both acid and alkaline solutions. Applied using heated plural component spray equipment.
See Specs Below
Specification And Application Guideline For Coating FRP Surfaces With Iraseal 200
Specification And Application Guideline For Coating Concrete Surfaces With Iraseal 200
Specification And Application Guideline For Coating Steel Surfaces With Iraseal 200
Irathane 155
A high solids, two component, standard cure, elastomeric polyurethane designed to provide excellent resistance to both corrosion and abrasion. Applied by airless spray, brush or roller.
See Specs Below
Specification And Application Guideline for Coating FRP Surfaces With Irathane 155
Specification And Application Guideline For Coating Concrete Surfaces With Irathane 155
Specification And Application Guideline For Coating Steel Surfaces With Irathane 155
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Protec II PW
A 100% solids, two component, fast set, direct to metal, flexible urethane certified per ANSI/NSF Standard 61 for use as a lining in potable water tanks and pipes. It provides a very hard, tough surface with outstanding adhesion and impact resistance. App
Protec II PW SV
100% solids, direct to metal, fast-set, two component urethane certified per ANSI/NSF Standard 61 for use as a lining in potable water tanks and pipes. It provides a very hard, tough surface with outstanding adhesion and impact resistance. Requires plural component, heated application equipment.
*
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
ITW Futura Coatings is, without question, the most diversified
company in the specialty coatings and systems business.
We're here to help.
Call TODAY (281) 397-0033
Booklets • Equipment Information
Foamseal E-Z Fill Brochure • Slide Presentations
Specifications • Technical Support Handbook
WEFTEC 2010 ITW Futura Coatings attending WEFTEC in New Orleans, LA October 4-6, 2010. ...Read More
IAAPA Expo & Conference ITW Futura Coatings attending IAAPA Expo & conference: Orlando, FL November 16-19th, 2010. ...Read More
Futura Coatings specializes in developing and manufacturing high performance polyurethane and polyurea coatings, elastomers, structural resins, epoxies, novolacs, vinyl esters, primers, water based systems and other specialty coatings through a world wide network of industrial distributors in North America, South America, Europe, Australia, Asia, Japan and the Far East.
ITW Polymer Technologies is a group of ITW business units focused on providing proven solutions to to difficult problems utilizing polymer materials. Please visit our websites for more information.
Contact Us Here... Or, CALL US TODAY!
(281) 397-0033
We're here to help.
