POLYMER COATINGS FOR WATER AND PETROCHEMICAL PIPE ITW Futura Coatings
ITW Furura Coatings manufacture polyurethane elastomer, polyurea, epoxy and vinyl ester lining systems, on concrete and steel for applications in water and wastewater structures, including structural polyurea systems for concrete rehabilitation.
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
CC 4500
A high performance, high density, ceramic filled, brushable epoxy for repair of Protec II PW and Protec II PW-ER.
*
Futura‑Thane 527
A 100% solids, two component, fast set, direct to metal (DTM), flexible, aromatic urethane. It offers outstanding water and chemical resistance, extreme levels of toughness and excellent low temperature impact resistance. Applied using heated plural compo
See Specs Below
Specification Guideline For Coating Interior Steel Surfaces Of Tanks And Pipe With Futura-Thane 527
Specification Guideline For Coating Exterior Steel Surfaces Of Tanks And Pipe With Futura-Thane 527
MEKPO Catalyst
Used with the Vinyl Ester Systems. Refer to the Systems Product Data Sheet for more information regarding the use of this product
Pipe Mate 1
A 100% solids, two component, standard cure, epoxy-amine formulated to provide excellent chemical resistance and adhesion to steel. Specifically designed as a repair material for pipe coating systems. Applied by airless spray, brush or roller.
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Pipe Mate 1 (espanol)
Un revestimiento de epoxy-amina con 100% de sólidos formulado para tener una excelente resistencia química y máxima adhesión al acero. Está especialmente diseñado como material de reparación para varios sistemas de revestimiento de tuberías como: poliuret
Protec II A 100% solids, two component, fast set, direct to metal, flexible urethane. It provides a very hard, tough surface with outstanding adhesion and impact resistance to protect against damage during the process of burying for underground service conditions.
Protec II (espanol)
Uretano de dos componentes, con 100% de sólidos, de endurecimiento rápido. Brinda una superficie muy dura y resistente, con notable adherencia y resistencia al impacto para proteger contra posibles daños durante el proceso de enterrado en condiciones de
Protec II PW
A 100% solids, two component, fast set, direct to metal, flexible urethane certified per ANSI/NSF Standard 61 for use as a lining in potable water tanks and pipes. It provides a very hard, tough surface with outstanding adhesion and impact resistance. App
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Protec II PW (espanol)
Uretano de dos componentes, 100% sólido, directo al metal, de rápido curado, certificado por el Instituto Americano de Estándares Nacionales /Fundación Nacional de Sanidad, ANSI/NSF por su nombre en inglés, y siguiendo su estándar 61 para ser utilizado co
Protec II PW ER
A 100% solids, direct to metal, fast-set, two component urethane certified per NSF/ANSI Standard 61 for use as a lining in potable water tanks and pipe. It provides a very hard, tough surface with outstanding edge retention, adhesion and impact resistance
*
Protec II PW SV
100% solids, direct to metal, fast-set, two component urethane certified per ANSI/NSF Standard 61 for use as a lining in potable water tanks and pipes. It provides a very hard, tough surface with outstanding adhesion and impact resistance. Requires plural component, heated application equipment
*
Retardant M Used with the Vinyl Ester Systems. Refer to the Systems Product Data Sheet for more information regarding the use of this product
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Thickener 9000
Used with the Vinyl Ester Systems. Refer to the Systems Product Data Sheet for more information regarding the use of this product.
Thinner 9000 Used with the Vinyl Ester Systems. Refer to the Systems Product Data Sheet for more information regarding the use of this product.
VE 8300 Series VE 8300 Series linings are formulated using proprietary novolac vinyl ester resins and glass flakes. This series is designed to provide long term corrosion protection under conditions of corrosive gasses, chemicals and fuel oils
VE 9300 Series VE 9300 Series linings are formulated using proprietary novolac vinyl ester resins and glass flakes. This series is designed to provide long term corrosion protection under conditions of corrosive gasses, chemicals and fuel oils.
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
ITW Futura Coatings is, without question, the most diversified
company in the specialty coatings and systems business.
We're here to help.
Call TODAY (281) 397-0033
Booklets • Equipment Information
Foamseal E-Z Fill Brochure • Slide Presentations
Specifications • Technical Support Handbook
WEFTEC 2010 ITW Futura Coatings attending WEFTEC in New Orleans, LA October 4-6, 2010. ...Read More
IAAPA Expo & Conference ITW Futura Coatings attending IAAPA Expo & conference: Orlando, FL November 16-19th, 2010. ...Read More
Futura Coatings specializes in developing and manufacturing high performance polyurethane and polyurea coatings, elastomers, structural resins, epoxies, novolacs, vinyl esters, primers, water based systems and other specialty coatings through a world wide network of industrial distributors in North America, South America, Europe, Australia, Asia, Japan and the Far East.
ITW Polymer Technologies is a group of ITW business units focused on providing proven solutions to to difficult problems utilizing polymer materials. Please visit our websites for more information.
Contact Us Here... Or, CALL US TODAY!
(281) 397-0033
We're here to help.
