Structural and flexible polyurea and polyurethanes systems for use as alternatives to fiberglass or steel aftermarket composite fabrication. And polyurea and polyurethane "hard coats" for application over lightweight foam to allow for the creation of cost-effective, elaborate, custom architectural shapes and trim.
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Adhesion Promoter 1552
Used with Ultrachrome 452. See the Product Data Sheet for information regarding the use of this product.
Futura‑Bond 16677
A 100% solids, two component, fast set, thixotropic epoxy patching material. Applied by trowel, spatula or putty knife.
Futura‑Bond 610 HS
A high solids, two component, standard cure, urethane primer.Specifically formulated to provide excellent anti-corrosive properties and to accept fast set and standard cure high build polyurethane or polyurea topcoats. Applied by airless or conventional.
Futura‑Patch 30052
A 100% solids, two component, fast cure, urethane with a thick, paste-like consistency designed to be used as a patching material for polyurethane and polyurea coating systems. Supplied in 300ml caulk tubes for ease of application.
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Sim Release 9910
A non-silicone, non-waxy mold release formulated to release a variety of ITW Devcon Futura Coatings in-mold materials. It is uniquely designed to attach itself to the mold and not transfer to the part. Applied by conventional spray.
Styro‑Bond 405
A single package, standard cure, flexible primer-surfacer designed primarily for architectural finishes or as a professional refinishing of mold polyurethane or polyurea parts. Applied by conventional spray.
Styrothane 35068
A 100% solids, two component, fast set, aromatic polyurethane “hard-coat” for EPS foam, styrofoam and PUF. Formulated to be fire retardant for various interior and exterior applications requiring an ASTM E-84 Class 1 fire rating. Applied using heated plur
Ultrachrome 1101
A single component coating designed as an in-mold coating (IMC) to enhance release properties. Dries extremely fast for increased efficiency. Specifically formulated as a base coat for the FUTURA-ROCK coloring system. Applied by conventional spray.
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Ultrachrome 30001
An excellent post-finish material, that may be used as an in-mold coating for many urethane resins. It exhibits outstanding color and gloss retention while resisting chalking, checking and crazing. It forms a hard and mar resistant surface and is an ideal
Ultrachrome 452
A single component, standard cure, water based, aliphatic urethane. May be used as either an in-mold or post-finish coating. For post-finish applications, Adhesion Promoter 1552 is required. Applied by airless or conventional spray, brush or roller.
Ultrachrome 452 (espanol)
Uretano alifático a base de agua, de un solo componente, que puede ser usado como revestimiento durante el moldeado o después del acabado. Para aplicaciones después del acabado (no durante el moldeado), se debe usar Adhesion Promoter 1552.
Ultracore 5170
A 20 pound per cubic foot density, rapid set, spray applied, rigid polyurethane foam specifically formulated for the ITW Devcon Futura Coatings patented FUTURA-ROCK process, as well as other composite applications. Applied using heated plural component sp
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Ultrathane 5220
A 100% solids, two component, fast set, polyurethane elastomer specifically designed as a wear resistant surface to protect polyurethane foam, fiberglass, steel and concrete. Applied using heated plural component spray equipment.
Ultrathane 5270
A 100% solids, two component, fast set, aromatic urethane elastomer which exhibits excellent flexibility and weather stability. It is commonly used as an elastomeric in-mold coating for all kinds of flexible foam parts. Applied using heated plural compon.
Ultrathane 5341 A 100% solids, two component, fast set, structural, aromatic polyurethane formulated to provide excellent replication of rock, sea coral and other surface textures. It offers a balance of stiffness and impact resistance and can be demolded in 5-10 minutes.
Ultrathane 5342 FR
An economical, 100% solids, fast-cure aromatic structural polyurethane designed to provide excellent replication of rock, sea coral and other surface textures. The material offers a balance of stiffness and impact resistance. It can be demolded in 5-10 minutes. This product meets ASTM E-84 Class 1/Class A fire test criteria.
*
Product
Technical
MSDS
Specs
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
Ultrathane 5365
A 100% solids, two component, fast set, polyurea/polyurethane hybrid formulated for high performance structural applications. Its balance of stiffness and impact resistance makes it ideal for automotive applications. Applied using heated plural component.
Ultrathane 5410
A 100% solids, two component, fast set, structural polyurea/polyurethane. It is formulated to have a balance of outstanding heat resistance, impact resistance and stiffness. Applied using heated plural component spray equipment.
Ultrathane 5410 (espanol)
ULTRATHANE 5410 es un sistema estructural de spray de poliuretano/poliurea de curado rápido, 100% sólido. Está formulado para tener un equilibrio de sobresaliente resistencia al calor, resistencia al impacto y rigidez, así como un costo menor que los sist
Ultrathane 5410 FR
A 100% solids, two component, fast set, structural polyurea/polyurethane. It is formulated to have a balance of outstanding heat resistance, impact resistance and stiffness. Passes ASTM D 635 test criteria. Applied using heated plural component spray equ
* NOTE: A Material Safety Data Sheet is not available for this product on the website. Call 877-347-5730 for the MSDS for this product.
ITW Futura Coatings is, without question, the most diversified
company in the specialty coatings and systems business.
We're here to help.
Call TODAY (281) 397-0033
Booklets • Equipment Information
Foamseal E-Z Fill Brochure • Slide Presentations
Specifications • Technical Support Handbook
WEFTEC 2010 ITW Futura Coatings attending WEFTEC in New Orleans, LA October 4-6, 2010. ...Read More
IAAPA Expo & Conference ITW Futura Coatings attending IAAPA Expo & conference: Orlando, FL November 16-19th, 2010. ...Read More
Futura Coatings specializes in developing and manufacturing high performance polyurethane and polyurea coatings, elastomers, structural resins, epoxies, novolacs, vinyl esters, primers, water based systems and other specialty coatings through a world wide network of industrial distributors in North America, South America, Europe, Australia, Asia, Japan and the Far East.
ITW Polymer Technologies is a group of ITW business units focused on providing proven solutions to to difficult problems utilizing polymer materials. Please visit our websites for more information.
Contact Us Here... Or, CALL US TODAY!
(281) 397-0033
We're here to help.
